Skip to main content
DISCLAIMER:  Overseer Limited gives no warranties, representation or guarantees, express or implied in relation to the quality, reliability, accuracy and/or fitness for any purpose of the article. Overseer Limited expressly disclaims and assumes no liability whatsoever arising directly or indirectly from the use of, or reliance on this article.

COPYRIGHT: With the exception of user-supplied data, this Report is © 2018 Overseer Limited. All rights reserved. You may copy and distribute this Report in its entirety, as long as you do not mislead anyone as to its origin or implications, and provided you do not remove or alter the disclaimer above or this copyright notice.

Irrigation default management options - Depth per application and return period

Support
  • Updated

The irrigation system default values are based on industry experience gained across a number of modelling studies and documents.

The default depth per application and return period for each system is shown in Table 1. These were based on typical values for a ‘Depth applied to achieve target; fixed return period’.

Table 1. Default depth per application and return periodmceclip0.png

1 PAW is the Profile available water to 600 mm depth

2  Values are for default option of ‘1 shift per day’. For the option ‘2 shifts per day’, the values are the integer value of half the ‘1 shift per day’ values.

Related articles